Guitar stain for wood White and everything you need to paint electric guitars
White guitar dye. Give life to your guitar
250 ml bottle
NitorTINT White dyes for guitars are specially designed to change the color of the wood with maximum transparency without altering the mesh of the natural wood. Concentrated dyes with a double utility. On the one hand, they can be diluted with a solvent to apply directly to the wood with a solvent or spray gun. On the other hand, they can be used to color the finishing varnish. They are universal stains that can be diluted in solvent, water or alcohol. In the case of application with a squeegee it is recommended to use water or a Nitorlack Retard solvent. NitorTINT dyes are recommended to be diluted in a proportion between 3% and 10% depending on the type of application.
Highlights the wood grain.
Enhance the beauty of any wood by highlighting its grain with NitorTINT stains. Dilute the stain with Solvent Retard or Water and by using a wood dab you can get that 3D effect on the tops of woods such as quilted maple, flamed maple and woods with very pronounced grain. A trick to highlight the grain of the wood is to apply a White stain as a base and sand, then apply stain of the color you want. We will obtain a much more pronounced effect since the White stain will remain in the most pronounced grains of the wood and the rest with the chosen color.
Dyes and varnishes for flamenco and classical guitar.
In Nitorlack we did not want to forget the dyes for classical or flamenco guitar. We have specially formulated classic Spanish guitar dyes, flamenco red, White, White and old gold. We recommend to dilute about 2 or 3% of the NitorTINT dyes and apply uniformly until you get the tone you want.
Apply the White guitar dye easily.
Preval refillable spray
If you don’t have an airbrush gun you can apply the dye very easily with the Preval spray system. This replaceable spray system consists of a glass tank of 170 ml where we put the mixture of dye with diluent and replaceable spray cartridges. Through a Venturi vacuum process it extracts the medium from the enclosed tank and delivers a professional finish without mixing the propellant and the medium. The replaceable cartridges are capable of spraying up to 650 ml. The result is an unadulterated finish with no color change.