CONDUCTIVE SHIELD PAINT

(13 customer reviews)

18.95

Nitorlack’s conductive paint has the main purpose of reducing interference from external agents in your guitar, by means of the insulating protection it possesses:

  • Reduces the noise and interference inside your guitar.
  • Protects the internal cavities of the guitar
  • Easy to apply and use
  • Water-based product, certified as environmentally and human health friendly.
  • With one bottle you can shield 5 to 10 guitars.

Availability: In stock

COVER TAPE

Measures 24mm x 50mtrs

Professional masking tape to cover the areas you don't want to paint. High quality paper and glue.

Resists high temperatures and leaves no adhesive residue when peeled off.

The difference with respect to other similar types of tape is in the ease of removing it from the surface of the guitar once the paint job is finished.

SKU: 270700114 Category:

Conductive guitar paint

Application tutorial:

1- Dismantle all the electronic elements of the electronic part of the guitar, this way it will be easier to apply the paint. If your guitar has a pickguard, you can apply the paint only by unscrewing the pickguard and being careful not to stain the wires, as for example in a telecaster or stratocaster. Although we recommend disassembling everything to make it easier.

2 – Clean the surface of any dirt that may cause the paint not to hold, such as dust, grease, etc.

Apply the conductive nitorlack paint with a small brush, with fine strokes and taking care to leave the surface perfectly covered. Allow 2 to 3 hours for the paint to dry.

4- Apply a second coat of paint to ensure good conductivity and that the whole area is perfectly painted.

5- We have to paint the area of the electronics cavity and the lid or pickguard of the guitar so that when it is closed it makes good contact between the parts and has good conductivity.

6- Connect a cable with a screw to any area of the cavity painted with conductive paint, this cable must be connected to ground for correct operation. The ground can be any area of the potentiometers or directly to the ground of the output jack.

7- Re-install all the electronics and close the electronics cavity of the guitar. If everything has been done well, there will be a very important improvement in the interference and external noises on our guitar.

Technology & Size

200 ml bottle, Waterbased

13 reviews for CONDUCTIVE SHIELD PAINT

4.7
Based on 13 reviews
  1. French

    Rémi Langlumé (verified owner)

    (0) (0)
  2. English

    Robert Schotman (verified owner)

    A perfect way covering the cavity walls and the get rid of the hum

    (0) (0)
  3. French

    Stephane Leclercq (verified owner)

    Super et rapide merci

    (0) (0)
  4. Italian

    Mattia Linzi (verified owner)

    Non ho ancora testato, ma sono sicuro che Nitorlack NON deluderà;)

    (0) (0)
  5. English

    Joost (verified owner)

    nlNetherlands

    (0) (0)
  6. French

    Gerald M. (verified owner)

    Super produit pour effectuer le blindage d’une guitare. Il y a suffisamment de produit pour en faire 5. Prix intéressant. Livraison rapide. Dommage que les frais de transport soient si élevés. Je recommande.

    (2) (0)
  7. French

    Eric M. (verified owner)

    (0) (0)
  8. French

    Rémy DEVEZE (verified owner)

    simple à utiliser, moins efficace que le cuivre, mais suffisant pour des cavités humbuckers

    (0) (0)
  9. Spanish

    Laureano López Moreno (verified owner)

    Fácil de aplicar y muy efectivo

    (0) (0)
  10. Italian

    Vincenzo Amari (verified owner)

    Si distende facilmente…spero però mantenga quanto promesso.

    (0) (0)
  11. Spanish

    Sergi L. (verified owner)

    (0) (0)
  12. Spanish

    David Alcazar Delgado (verified owner)

    no es del todo negro opaco

    (0) (0)
  13. Spanish

    Sergio Q. (verified owner)

    esMadrid, Spain

    Muy buen producto

    (0) (0)

Only logged in customers who have purchased this product may leave a review.

You may also like…

Shopping Cart
Scroll to Top