Vintage-inspired guitar colors
Nitrocellulose Graffiti Yellow. Based on original Fender and Gibson colors. To develop our colors for guitars we have been based on original samples from the 50s and 60s. After a great work and exhaustive study on the part of our laboratory and technical department, we have obtained some colors for guitars that faithfully recreate the tones of vintage Fender and Gibson guitars to paint electric guitar. During those years until today, it should be borne in mind that the colors of vintage guitars have varied greatly over the years due to the aging of the nitrocellulose lacquer and changes in the colors of the brands. Therefore two guitars finished in 1960 with fender card colors today can be totally different between them or with respect to a more current guitar.
Nitrocellulose Lacquer Graffiti Yellow Spray
Paint your guitar easily with our spray. So that the painting equipment is not an impediment to painting your guitar, at Nitorlack we have developed all our guitar colors in nitrocellulose spray format. You can achieve a professional finish with our entire range of products, from backgrounds and the entire range of colors, to gloss and matte nitrocellulose lacquer. How much product do I need to buy guitar paint spray? It will depend a lot on the type of wood and the amount of product that is applied for each coat and the desired finish, mirror effect or “open pore”. But in general to paint a guitar with a medium wood pore, for an electric guitar neck: 2 nitrocellulose finishing spray (gloss or matte), for an electric guitar body: 1 nitrocellulose background spray and 3 nitrocellulose finishing spray (gloss or matte), classical or acoustic: 1 nitrocellulose background spray and 4 or 5 nitrocellulose finishing spray (gloss or matte) and Ukulele: 2 nitrocellulose finishing spray. (gloss or matte). If you want to apply a color, between a nitrocellulose base and a nitrocellulose finish, you should add 1 or 2 spray of the desired guitar color. Spray application tips Shake vigorously for 2 to 5 minutes before applying. It is recommended to apply the spray in thin layers and with an ambient humidity as low as possible. Apply with a uniform movement and with a distance of approximately 20 cm. It is important to apply a primer and sand with 400 before applying the spray to achieve a uniform surface before coloring or finishing. Sand between coats and allow to dry for 12 to 24 hours between coats. Apply in ventilated areas. You can buy guitar sandpaper in our store.
Nitrocellulose paint Graffiti Yellow in can
Professional finish. If you want to paint your guitar a perfect finish and you have a painting equipment (spray gun and compressor) the best choice is nitrocellulose varnish in a can, you have a higher performance for a lower price and with a painting equipment the final result will be professional with less effort. It is recommended to dilute the product with solvent to adjust the viscosity and for the application to be perfect, we have two types of solvents. The usual solvent used is Solvent Medium, but for more extreme humidity and temperature environmental conditions we can use Solvent Retard to avoid boiling and blurring in the finish. The optimal application conditions are between 15 and 25 ºC of temperature and 50 to 70% of humidity. The percentage of dilution will depend on the painting equipment and its configuration, but it is recommended between 10 to 20% solvent. The most common gun peak is 1.3 to 1.5 and the compressor pressure is about 2.5 to 3 bars.
Maximum resistance respecting the sound. Graffiti Yellow. If what you are looking for is to protect your guitar and achieve a durable finish with classic colors, your choice is polyurethane, a 2-component product that offers maximum resistance and fast drying while respecting the sound and vibration of the wood. With the purchase of a 500 ml can of color it is always combined with a 250 ml bottle of 190046 catalyst. The mixing ratio of the product is 2 parts of color to 1 of hardener (2: 1). As with canned nitrocellulose, the viscosity can be adjusted with either of the two solvents we offer. Once the mixture is made, it has a life time of 2 hours to be able to apply it. Apply in thin coats waiting 8 to 12 hours between coats and always sand to tone the previous coat and ensure grip.
|TECHNOLOGY AND PACKAGING||
Nitrocellulose 500 ml, Nitrocellulose can 1L, Nitrocellulose spray, Polyurethane 500 ml
Only logged in customers who have purchased this product may leave a review.