ANTIQUE IVORY

(5 customer reviews)

16.9626.50

Classic ANTIQUE IVORY GIBSON finish

Cream color more intense than CREAM with a slight pinkish tone.

Cream color more intense than CREAM with a slight pinkish tone.

SKU: ANTIQUE IVORY Categories: ,

Our vintage-inspired colors

The Nitorlack colors are based on the original Fender and Gibson colors. The creation of these colors is preceded by a great work and exhaustive study by our laboratory and technical department. Thanks to this we have managed to faithfully recreate the tones of Fender and Gibson guitars from the 50’s and 60’s.

During those years until today it should be noted that the colors of vintage guitars have varied greatly over the years due to the aging of the nitrocellulose lacquer and modifications in the colors of the brands themselves.

Therefore, two guitars finished in 1960 with fender colors today may be totally different from each other or from a more current guitar.

antique ivory color

Application guide:

  • We begin to apply the color once we have anchored the guitar with Nitorlack Primer.
  • When we start the paint job the pores should be closed and the grain should not be marked
  • Apply the product either by spray or gun at about 25 cm.
  • When applying we must follow an application pattern, first horizontal and then vertical, uniformly applying the paint.
  • Apply several coats, letting dry between them about 24 hours and sanding between them, to remove any remaining impurities.
  • This work will be completed when the surface is completely smooth and free of imperfections.

 

Frequently asked questions:

 

How many sprays do I need to varnish a guitar?

– If the surface is well covered and it is not your first painting project, you can do it with a spray, although you will not apply many coats. However if you are not an expert we recommend using 2 sprays for an optimal finish.

 

What temperature should the guitar be at during and after the process?

-For best results, we recommend applying it in a place whose temperature is between 15 and 25 degrees and between 45% and 60% humidity.

 

Where should I perform the process?

-A clean place will be essential, to prevent dirt or dust particles from adhering to the surface.

 

Is sanding between coats mandatory?

It is not something you should always do, but it is recommended to remove imperfections that remain in the paint at the end of each layer, as well as particles that may adhere.

Share your works on social networks using our hashtag

#myNitorlack

With the guarantee of Valresa Coatings SA

Weight N/A
Technology & Size

Nitrocellulose 500 ml, Nitrocellulose can 1L, Nitrocellulose spray 400ml, Polyurethane 500 ml

5 reviews for ANTIQUE IVORY

  1. Italian

    Marco M. (verified owner)

    Forse un po’ troppo tendente al rosa

    (0) (0)
  2. Spanish

    Quico (verified owner)

    esSpain

    Es la cuarta vez que utilizo barniz nitorlak y repetiré sin dudarlo las veces que sea necesario.
    Al ser nitrocelulosa para pintar con pistola es necesario diluirlo un poco para que no se atasque la pistola, pero el acabado es muy bueno.

    (0) (0)
  3. Spanish

    MAXIMO ENRIQUE RODRIGUEZ (verified owner)

    Responden rápido a las consultas o cambios y ofrecen un Excelente servicio.

    (0) (0)
  4. Italian

    Luigi Cardinale (verified owner)

    (0) (0)
  5. Italian

    Stefano Fatti (verified owner)

    Excellent quality, color is exactly as in the pictures, in standard conditions (about 25°C and normal RH) varnish dries in about 24 hrs. Very good quality/price ratio.

    (0) (0)

Only logged in customers who have purchased this product may leave a review.

You may also like…

Shopping Cart
Scroll to Top