Refillable spray with glass bottle
When to use the refillable spray can?
In case you have not opted to use our nitrocellulose spray and wish to use a polyurethane or water-based solution, but do not have a spray gun, the refillable spray is for you.
The refillable spray allows you to spray your paint, nitrocellulose, polyurethane or waterborne for a beautiful, even finish.
What products can the refillable spray can be combined with?
The refillable spray can be used with our various lacquer, waterborne polyurethane and nitrocellulose products. The proportion in which the product has to be diluted depends on the product to be used.
Preparation and application of the product:
- The refillable spray comes in 2 parts, a glass bottle and the refillable spray.
Fill the glass bottle with no more than 170 ml of the paint you wish to use to finish your guitar kit. Make sure you have shaken the paint beforehand so that it is homogeneous, - Screw the refillable spray article into the glass container,
- Spray the paint onto the body and neck of the guitar to obtain the desired finish.
Please note that the glass canister is reusable as many times as necessary and you can only buy refill for the spray products, simply leave the canister clean.
The refill spray can sprays a total of 500-600mL of paint with a pressure of 4.4bar and a 4mm nozzle.
A refill is also available on our website to extend the life of this product.
TECHNICAL DATA
Gas unit: 3 oz. (85.05 gr) Propellant, with a yield of 453.6 in liquid (16 oz).
(ecological and innocuous)
Spray pressure: 4.4 bar.
Glass tumbler capacity: 6 oz./ 170ml (reusable)
Viscosity: 17 sec for 100 ccm liquids
4-mm nozzle (DIN EN ISO 2431).
LUIS (verified owner) –
IGOR GRINKO (verified owner) –
Mario Fernández Barajas (verified owner) –
Bueno, pues no esperes un rociado de calidad. El producto funciona y efectivamente pintas. Te saca del apuro y dura más o menos en condiciones.
Lo peor, sin lugar a dudas, la boquilla. Espolvorea generando gotas. Algo que se podría solucionar fácilmente con una boquilla un poco mejor genera que el acabado sea un poco precario. Podrían poner algo que rociara el contenido de una manera más sutil y elegante.
Imagino que como no saben que producto ni la densidad de lo que vas a rociar…pues poned 2 boquillas. Una para producto más líquido y otra para algo más denso…o algo así.
En definitiva, una boquilla mejor haría de este un producto mucho mejor.
Nitorlack (store manager) –
Hola Mario, lo tenemos en cuenta y le enviamos tu comentario al fabricante del producto. Gracias
David Sauvagnargues (verified owner) –
Andreu (verified owner) –
Gabriele Cesarano (verified owner) –
Anónimo (verified owner) –
funcional