Our vintage-inspired colors
The Nitorlack colors are based on the original Fender und Gibson colors. The creation of these colors is preceded by a great work and a thorough study by our laboratory and technical department. This has allowed us to faithfully recreate the sound of Fender and Gibson guitars from the 50s and 60s.
During these years until today, it should be noted that the Vintage guitar colors have varied greatly over the years due to the aging of the nitrocellulose lacquer and modifications in the colors of the brands themselves.
Therefore, two guitars finished in 1960 with fender colors today may be totally different from each other or from a more current guitar.
Application guide:
- We begin to apply the colour once the guitar has been dabbed with Nitorlack Primer.
- When we start the painting work, the pores must be closed and the grain must not be marked.
- Apply the product either by spray or spray gun at a distance of about 25 cm.
- When applying we must follow a pattern of application, first horizontally and then vertically, applying the paint evenly.
- Apply several coats, letting them dry for about 24 hours and sanding between them to remove any remaining impurities.
- This work shall be completed when the surface is completely smooth and free of imperfections.
FAQ:
How many sprays do I need to varnish a guitar?
– If the surface is well coated and it is not your first project, you can do it with one spray, although you will not apply many coats. However if you are not an expert we recommend using 2 sprays for an optimal finish.
What temperature should the guitar be at during and after the process?
– It is recommended to be done in a place where the temperature is between 15 and 25 degrees.
Where should I carry out the process
A clean site will be essential, to prevent dirt or dust particles from adhering to the surface.
LUIS (verified owner) –
Luís Miguel Mouriño Pérez (verified owner) –
Levouin Pascal (verified owner) –
Enzo Junior Sacco (verified owner) –
LEFEBVRE Guy LEFEBVRE Guy (verified owner) –
Correspond a mon besoin . Facile d emploi résultat conforme
LAURENT B. (verified owner) –
Fort pouvoir de recouvrement. Noir profond et ultra brillant après ponçage et lustrage. Utilisé pour restaurer une Gibson Les Paul Custom. 2 bombes de peinture + 2 bombes de vernis brillant Nitorlack ont été nécessaire pour un travail de qualité. Produits vraiment efficaces pour instruments.
Paolo Calvano (verified owner) –
Sergi Rodríguez (verified owner) –
ALBERTO LERMA DEL CAMPO (verified owner) –
Anónimo (verified owner) –
Vidas (verified owner) –
don’t know waiting to try
Alfonso Manzi (verified owner) –
Easy to spray for professional results. AAA+
Massimo Ceresa (verified owner) –
Rudy (verified owner) –
magnifique
Rocco Maiocchi (verified owner) –
DIDIER TAIEB (verified owner) –
La couleur est parfaite mais pas de bon finish a cause du problème de primer… La 2eme couche était mauvaise à cause de pulvérisation en gouttes
Anonymous (verified owner) –
Nice deep black color, with a good coverage. It dries fast and hardens just like a topcoat.
Sergi L. (verified owner) –
Johannes H. (verified owner) –
David B. (verified owner) –
Brian (verified owner) –
Hubert DESPLANQUES (verified owner) –
John P. (verified owner) –
Anónimo (verified owner) –
Brian Harte (verified owner) –