Nitrocellulose lacquer SILVERSPARKLE for guitar paint and all you need to learn how to paint a guitar

#mynitorlack

#mynitorlack

Nitrocellulose Lacquer Silver Sparkle Spray

Paint your guitar easily with our spray. So that the painting equipment is not an impediment to painting your guitar, at Nitorlack we have developed all our guitar colors in nitrocellulose spray format. You can achieve a professional finish with our entire range of products, from backgrounds and the entire range of colors, to gloss and matte nitrocellulose lacquer. How much product do I need to buy guitar paint spray? It will depend a lot on the type of wood and the amount of product that is applied for each coat and the desired finish, mirror effect or “open pore”. But in general to paint a guitar with a medium wood pore, for an electric guitar neck: 2 nitrocellulose finishing spray (gloss or matte), for an electric guitar body: 1 nitrocellulose background spray and 3 nitrocellulose finishing spray (gloss or matte), classical or acoustic: 1 nitrocellulose background spray and 4 or 5 nitrocellulose finishing spray (gloss or matte) and Ukulele: 2 nitrocellulose finishing spray. (gloss or matte). If you want to apply a color, between a nitrocellulose base and a nitrocellulose finish, you should add 1 or 2 spray of the desired guitar color. Spray application tips Shake vigorously for 2 to 5 minutes before applying. It is recommended to apply the spray in thin layers and with an ambient humidity that is as low as possible. Apply with a uniform movement and with a distance of approximately 20 cm. It is important to apply a primer and sand with 400 before applying the spray to achieve a uniform surface before coloring or finishing. Sand between coats and allow to dry for 12 to 24 hours between coats. Apply in ventilated areas. You can buy guitar sandpaper in our store.

Silver Sparkle nitrocellulose paint in can

Professional finish. If you want to paint your guitar with a perfect finish and you have a painting equipment (spray gun and compressor), the best choice is nitrocellulose varnish in a can, you have a higher performance for a lower price and with a painting equipment the final result will be professional. with less effort. It is recommended to dilute the product with solvent to adjust the viscosity and for the application to be perfect, we have two types of solvents. The usual solvent used is Solvent Medium, but for more extreme humidity and temperature environmental conditions we can use Solvent Retard to avoid boiling and blurring in the finish. The optimal application conditions are between 15 and 25 ºC of temperature and 50 to 70% of humidity. The percentage of dilution will depend on the painting equipment and its configuration, but it is recommended between 10 to 20% solvent. The most common gun peak is 1.3 to 1.5 and the compressor pressure is about 2.5 to 3 bars.

Metallic polyurethane primer.

Improved formula for our metallic polyurethane colors. One-component acrylic primer. It allows to apply the color in a much more even way, giving a spectacular metallic appearance. It is important to finish the plating process with a clear polyurethane or nitrocellulose finish to protect the plating and add depth.

With the guarantee of  Valresa Coatings SA