NitorLACK Colores

NitorLACK Colors

CAMPO DE APLICACIร“N

ย Colores nitrocelulosa especial para guitarras para el acabado. Consigue fusionar capa a capa las manos de laca con el instrumento, dejando transpirar la madera y capaz de no interferir ni modificar el sonido reproducido por el instrumento, obteniendo una vibraciรณn pura. Fรกcil reparaciรณn y mantenimiento. Adecuado cualquier instrumento

Los grandes fabricantes de guitarra utilizan esta tecnologรญa para pintar guitarras en sus fabricas por su dureza adecuada, cubriciรณn y propiedades.

Laca nitrocelulosa de gran calidad y resistencia. Es un barniz de fรกcil aplicaciรณn que ofrece un excelente acabado, brillo o mate. Si su madera tiene poco poro puede realizar el acabado completo con este producto, aplicando capas finas y sucesivas.

1.- PREPARACION DEL FONDO

ย –ย  El color lo aplicaremos siempre sobre un fondo (primer). ย Debemos tener la superficie perfectamente lisa y si irregularidades, lijada con P800 para asegurar adherencia y que el acabado sea perfecto.

2.- APLICACIร“N DEL COLOR CON PISTOLA

ย – Para su aplicaciรณn pueden utilizarse Pistolas de Copa. (Boquillas recomendada de 1.3 a 1.6 mm, presioฬn 2,5 a 3 Bar)

– Para su aplicaciรณn a pistola es necesario ajustar la viscosidad con el disolvente apropiado, para obtener un resultado optimo. Puede utilizar nuestro disolvente Medium o Retard.

– Se recomienda aplicar dos manos del producto con lijado intermedio (Lija 800) con gramajes 120 a 160 g/m2 por mano para conseguir una buena cubriciรณn del soporte.

– Si se quiere conseguir una adherencia entre capas optima, se recomienda lijar y repintar pasadas 24 horas desde su aplicaciรณn

Las condiciones ambientales recomendadas para la aplicaciรณn de este producto son:

  • Temperatura: 15 a 25 C
  • Humedad relativa: 50 a 70%
  • Secado polvo 20 minutos
  • Secado tacto 60 minutos
  • Intervalo entre manos sin lijar: 20 a 30 minutos
  • Intervalo entre mano y mano lijada: 4 – 5 horas
  • Repintado: a partir de 12
  • Para una adherencia perfecta entre capas se recomienda lijar y repintar pasadas 24 Horas

2.- APLICACIร“N DEL COLOR EN SPRAY

ย – El color lo aplicaremos siempre sobre un fondo o un color, debemos tener la superficie perfectamente lisa y si irregularidades, lijada con P800 para asegurar adherencia y que el acabado sea perfecto.

– Las condiciones de temperatura, humedad y secado idรณneas son las mismas que el el proceso de pintado con pistola.

– Agita bien el sprayย antes de aplicar su contenido durante al menosย 2 minutos. De este modo, los pigmentos de pintura que contiene se podrรกn mezclar homogรฉneamente.

– Nunca dirijas el primer chorro de pintura que salga del bote sobre la superficie que vayas a pintarย ya que generalmente no es uniforme y puede producir salpicaduras, apunta hacia un trozo de cartรณn o papel por ejemplo.

– Sujeta elย sprayย siempre enย posiciรณn verticalย mientras estรฉs pintando.ย Testa primero el sprayย sobre alguna superficieย para verificar el color de la pintura. Laย distanciaย correcta entre el spray y la superficie a pintar debe ser de 25 cm aproximadamente. Comienza siempre a pulverizar alejado del objeto a pintar.

– Comienza pintando las zonas de la guitarra mas complicadasย como los laterales y zonas mas escondidas ya que insistirรกs mรกs sobre ellas para cubrirlas totalmente y si los alrededores ya estรกn pintados, puede producirse el temido chorretรณn o diferencias de color y relieve.

– Aplica varias capas finasย en direcciones cruzadas, primero verticalmente y luego horizontalmente.

– Coloca la guitarraย que vayas a pintar sobre una pequeรฑa base, si es giratoria mejor, ya que de esta forma nos aseguramos de que pintamos correctamente todas las zonas por igual.

– Recuerda esta fรณrmula a la hora de pintar con spray:ย varias capas ligerasย + correcto secado entre capas = un trabajo de pintura perfecto. Siempre es preferible realizar varias capas finas de pintura (aunque no sean totalmente cubrientes) que una sola, ya que de esta forma nos aseguramos un acabado mucho mรกs uniforme y sin defectos. Ademรกs, hay que respetar los tiempos de secado entre capas.

– Paraย limpiar la boquillaย de restos de pintura coloca el bote de spray bocabajo, apoya la boquilla sobre una superficie firme (el suelo, por ejemplo) y presiona hacia abajo hasta que deje de salir pintura.

ย RECOMIENDACIONES DE SEGURIDAD

Aplicar en lugares ventilados o con extracciรณn. Llevar guantes, prendas, gafas y mascara de protecciรณn. Lavarse concienzudamente tras la manipulaciรณn. En caso de contacto con los ojos: Enjuagar con agua cuidadosamente durante varios minutos. Quitar las lentes de contacto cuando estรฉn presentes y pueda hacerse con facilidad. Proseguir con el lavado. Lรญquido y vapores muy inflamables. Provoca irritaciรณn cutรกnea. Provoca lesiones oculares graves. Puede provocar somnolencia ะพ vรฉrtigo

APPLICATION UTILITIES

Nitrocellulose paint special for guitars for finishing. It manages to fuse the lacquer hands with the instrument layer by layer, allowing the wood to breathe and capable of not interfering or modifying the sound reproduced by the instrument, obtaining a pure vibration. Easy repair and maintenance. Suitable for any instrument

Large guitar manufacturers use this technology to paint guitars in their factories for their adequate hardness, covering, and properties.

High quality and resistant nitrocellulose lacquer. It is an easy-to-apply varnish that offers an excellent finish, gloss or matte. If your wood has little pore, you can complete the complete finish with this product, applying thin and successive layers.

1.- PREPARATION OF THE PRIMER or COLOR

– We will always apply the finish on a background or a color, we must have the surface perfectly smooth and without irregularities, sanded with P800 to ensure adherence and that the finish is perfect.

2.- APPLICATION OF THE FINISHING WITH A GUN

– Cup Guns can be used for its application. (Recommended nozzles from 1.3 to 1.6 mm, pressure 2.5 to 3 Bar)

– For its application by spray, it is necessary to adjust the viscosity with the appropriate solvent, to obtain an optimal result. You can use our Medium or Retard solvent.

– It is recommended to apply two coats of the product with intermediate sanding (Sandpaper 800) with grammages 120 to 160 g / m2 per coat to achieve a good coverage of the support.

– If you want to achieve an optimal adhesion between coats, it is recommended to sand and repaint after 24 hours from application

The recommended environmental conditions for the application of this product are:

  • Temperature: 15 to 25 C
  • Relative humidity: 50 to 70%
  • Dry powder 20 minutes
  • Touch dry 60 minutes
  • Interval between coats without sanding: 20 to 30 minutes
  • Interval between coat and sanded coat: 4 – 5 hours
  • Repainted: from 12 hours.
  • For a perfect adhesion between coats, it is recommended to sand and repaint after 24 hours.

2.- APPLICATION OF THE FINISHING IN SPRAY

– We will always apply the finish on a background or a color, we must have the surface perfectly smooth and without irregularities, sanded with P800 to ensure adherence and that the finish is perfect.

– The ideal temperature, humidity and drying conditions are the same as for the spray painting process.

– Shake the spray well before applying its content for at least 2 minutes. In this way, the paint pigments it contains can be mixed homogeneously.

– Never direct the first spray of paint that comes out of the bottle on the surface that you are going to paint since it is generally not uniform and can cause splashes, point towards a piece of cardboard or paper for example.

– Always hold the spray in a vertical position while you are painting. Test the spray on a surface first to verify the color of the paint. The correct distance between the spray and the surface to be painted should be approximately 25 cm. Always start spraying away from the object to be painted.

– Start by painting the most complicated areas of the guitar such as the sides and more hidden areas since you will insist more on them to cover them completely and if the surroundings are already painted, the dreaded drip or differences in color and relief may occur.

– Apply several thin coats in cross directions, first vertically and then horizontally.

– Place the guitar that you are going to paint on a small base, if it is rotating better, since in this way we make sure that we paint all the areas correctly.

– Remember this formula when it comes to spray painting: several light coats + correct drying between coats = a perfect paint job. It is always preferable to make several thin layers of paint (even if they are not completely covering) than just one, since in this way we ensure a much more uniform and flawless finish. In addition, the drying times between coats must be respected.

– To clean the nozzle of paint residues, place the spray can upside down, rest the nozzle on a firm surface (the floor, for example) and press down until the paint stops coming out.

SAFETY RECOMMENDATIONS

Apply in ventilated places or with extraction. Wear protective gloves, clothing, glasses and a mask. Wash thoroughly after handling. In case of eye contact: Rinse carefully with water for several minutes. Remove contact lenses when present and can be done easily. Continue with the wash. Highly flammable liquid and vapor. Causes skin irritation. Causes serious eye damage. May cause drowsiness or vertigo

Carrito de compra
Scroll al inicio